Electrochemical sensor for measuring free chlorine of inorganic chlorine products in water.
The chlorine measuring probe is an electrochemical sensor for measuring the concentration of chlorine in water. The measuring cell captures free chlorine from inorganic chlorine products (hypochlorite, chlorine gas, etc.). The measuring method has a reduced pH dependency, so that pH fluctuations only have a limited impact on the measurement signal. pH value increases only lead to an approximately 10 % reduction of the measuring signal per pH unit.
– Chlorine sensor/Chlorine Sensor (digital-out/digital)
– free chlorine, low pH dependence
– Measuring range: 0 … 2 mg/L
– potential free output
Protocol: Modbus
24 V or +/- 12 VDC, 20 mA,
0.5 bar, 45 °C
EMC test DIN EN 61326-1
RoHS compliant
Membrane cap M48.2 ”
incl.
– Retaining Ring “PEF” / “FLC-3”
– Sensor cabel 5 m M12 / 8 pole
System Benefits
- Stable signals even with fluctuating pH values
- Abrasive particles are tolerated
- Surfactants are partially tolerated
Applications
- Swimming pools
- Drinking water
- Seawater
Accessories
- Cable: Extension cables of 0.3 m, 2 m, 10 m, 25 m
- Controller: TriBox3, TriBox Mini, HS100
- Fittings: FlowCell
